> Free-track Crash, Won't Start
|
|
|
dbarry3162b |
|
Class : Apprenti
Posts : 5
Registered on : 31/12/2014
Off line
|
Problem signature:
Problem Event Name: APPCRASH
Application Name: FreeTrack.exe
Application Version: 2.2.0.279
Application Timestamp: 2a425e19
Fault Module Name: FreeTrack.exe
Fault Module Version: 2.2.0.279
Fault Module Timestamp: 2a425e19
Exception Code: c0000005
Exception Offset: 00019779
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 99f0
Additional Information 2: 99f0222017172e0de927f585da44b599
Additional Information 3: b9fa
Additional Information 4: b9fad0d61fbe22e0ff7a9925741e92fb
Works on another Windows 7 PC I have but wont startup on my flight sim PC unistalled and reinstalled multiple times.
|
|
dbarry3162b |
|
Class : Apprenti
Posts : 5
Registered on : 31/12/2014
Off line
|
I just installed Freetrack ver2.1.2.264 and it works? I tried re-installing ver 2.2 and crashes immediately when trying to start the program.
|
|
Steph |
|
Class : Moderator
Posts : 656
Registered on : 16/11/2007
Off line
|
Hi,
did you install and run it with admin rights?
|
|
dbarry3162b |
|
Class : Apprenti
Posts : 5
Registered on : 31/12/2014
Off line
|
Yes, admin rights, it installs fine but when I try to launch the program it give the above error and then another window pops up with, "Exception Access Violation in module freetrack.exe at 00019779. Read address 40239CA6".
I've run uninstall then scanned and cleaned registry multiple times and re-downloaded and installed multiple times. As I said above I have it working on another Windows 7 machine. I tried with a camera plugged in and as you know the program runs with or without a camera plugged in. I don't have the program launch at all.
I have a solid state hard drive as my C: drive and I tried installing it there and also on my D: drive, but that shouldn't matter.
|
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
Hi
freetrack can only work with win7 if the dpi is set to smaller(100%) instead of normal(125%).Just check what dpi seting you have, maybe that'syou problem.
https://www.lawfirmsoftware.com/support/change_dpi_settings_windows_7.htm |
|
dbarry3162b |
|
Class : Apprenti
Posts : 5
Registered on : 31/12/2014
Off line
|
That was it, my setting was medium sized fonts. I was seeing other posts about access violations and DPI settings and was trying those but Stormrider your post did it, I know this is free software but wouldn't that be easy to fix? Seems like it's been posted on since 2009? Damn those fonts are small now at 1920 by 1200.... now I have to go back to hacking the IR filter in my creative VF-0050
|
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
there is also something like "facetrack-noir"with pointracker plug-in.
It works the same as freetrack, but with less options.For this one you don't have to change the dpi-setting and that is one of the reasons why I started to use that. 
http://facetracknoir.sourceforge.net/home/default.htm |
|
knightal |
|
Class : Apprenti
Posts : 4
Registered on : 07/01/2015
Off line
|
Hi
I have similar problem
I have DPI set at 100% and have admin turned on.
When I try to use source and the camera option and click start I ger the error message
" FreeTrack.exe has stopped working" and the program has to be closed.
I have win 7 64 bit and my camera is a inbuilt one in my Asus notebook
And advise thanks
Regards
Allan  |
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
Hi,
what error code do you get?
And what model Asus notebook do you have?
|
|
knightal |
|
Class : Apprenti
Posts : 4
Registered on : 07/01/2015
Off line
|
Hi
Comes up with a windows error box saying
FreeTrack.exe has stopped working
A problem caused the programe to stop working correctly.
Windows will the program and notify you if a solution is available
There is a clickable box with one option to Close Program
My notebook specs:
Ausus Republic Of Gamers Notebook Model G74S
Intel i7-2670QM CPU @2.20GHz
RAM 16GB
64 bit Win 7 Home Premium SP1
Video nVidia GeForce 560M GTX 2GB
The version of Free Track I have is 2.1
The demo works OK it is when I try to select my inbuilt notebooks webcam which shows as Asus default or Asus usb selecting either causes the above problem.
I just connected a Logitech Webcam 200 and it actualy worked although the display was all discoloured bit like a negative film, but the whole program simply dissapeared like it was closed but attempting to restart gives a windows error box saying
"Another instance is running. Terminating"
After closing the box and try to start it again the same box shows and I have to restart the computer to actually get it to start again.
Just a thought but is this a 32bit only program? as I have 64bit OP
Regards
Allan
Edited by knightal on 07/01/2015 at 11h19. |
|
knightal |
|
Class : Apprenti
Posts : 4
Registered on : 07/01/2015
Off line
|
Hi again,
I uninstalled version Freetrack: 2.1.2.264 and installed Freetrack: 2.2.0.279 and all seems to be OK.
Freetrack: 2.2.0.279
Filter 1.5.3.0
client 1.0.0.266
NPClient 1.5.0.267
Unchecking Auto Minimize fixed the shutting off of the program. Dugh!!!
Thought I'd post this so as to help anyone else who may have the same problems.
I guess now is a good time to actually read the manual. 
Regards
Allan |
|
Stormrider |
|
Class : Légende du Forum
Posts : 466
Registered on : 02/01/2013
Off line
|
Unchecking Auto Minimize fixed the shutting off of the program. Dugh!!!
It is advised to minimize freetrack when you start gaming to minimise the resources it use for tracking.So it can be useful to let be auto minimized.
This software is from 2009(long time ago), maybe you don't need it anymore because of computers are much faster and have more ram these days.
I guess now is a good time to actually read the manual
and search this forum, there is a lot to read.
|