FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS > Measurements of a Original Track Clip?

Tomkin	#1 18/02/2010 - 10h54 Top
Class : Apprenti Posts : 16 Registered on : 16/12/2007 Off line	Hi, does anyone have the dimension/shapes/size of a original track clip? I find thousands of photos but there is no datasheet avaiabla. Probably cause anyone would see what a cheap piece ob plastics and wires they sell for about € 45,-- . CU Tomkin
nadrealista	#2 20/02/2010 - 10h30 Top
Class : Habitué Posts : 84 Registered on : 13/01/2010 Off line	Post #6 http://forum.free-track.net/index.php?showtopic=1628&hl=track-clip-dimensions
benmeijer	#3 20/02/2010 - 11h17 Top
Class : Habitué Posts : 208 Registered on : 19/07/2008 Off line	To complete this topic: I placed values on a picture from "Ranger" , the clip is placed on gridpaper with a 5 mm grid-size. and a picture with grid over it .... Edited by benmeijer on 20/02/2010 at 11h26.
Tomkin	#4 01/03/2010 - 11h51 Top
Class : Apprenti Posts : 16 Registered on : 16/12/2007 Off line	Many thanks ! Now i try to build a System with original size. I built one made of alloy and used it with Free-Track. I would like to use free track with the original TrackIR 4 cam, but sadly its not longer allowed to use this Hardware with freetrack. CU Tomkin

> Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).