FreeTrack Forum

Welcome, you're not connected. ( Log in - Register )

RSS >  3 point clip problem, calibration?
Gbur #1 13/09/2012 - 19h30

Class : Apprenti
Posts : 1
Registered on : 13/09/2012

Off line

If I turn my head in yaw axis to the left, the Z axis automatically zoom in without my head moving closer to the camera, in case of right turn, Z axis zooms out. Almost same problem witch, Roll affecting Y axis, X affecting Yaw and Y affecting Pitch. How to fix it?

Points are well visible, the program does not lose track, FT is up to date, the camera is centered and is at the height of the head, the 3 point clip model is more or less same as default dimensions, the FT profile is default.

regards

edit:
sorry, problem fixed, misunderstood model position usage
Edited by Gbur on 13/09/2012 at 20h07.

 >  Fast reply

Message

 >  Stats

1 user(s) connected during the last 10 minutes (0 member(s) and 1 guest(s)).