|
Class : Apprenti
Posts : 5
Registered on : 19/11/2007
Off line
|
With 2.1.2 is it possible to assign a key which change or translate the output from one of the 6 axis to another one?
What I will like to have is pressing the SHIFT key while moving the "Yaw" axes to get a "X" translation.
I still have a one-point device.
Edit: Done using GlovePIE "if key.shift then faketrackir.x=EnsureMapRange(realtrackir.yaw,-180,180,-0.5,0.5)"
Edited by alef on 14/08/2008 at 01h52. |